New Products
Find Rubber Expansion Joint For Bridge, Rubber Bridge Expansion Joint, Bridge Expansion Joint on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Payment Type: | L/C, Paypal |
---|---|
Min. Order: | 10 Bag/Bags |
Model No.: various
Expansion volume | 30mm-150mm |
Adaptive temperature | Ordinary type:+80ºC--25ºC |
Hardy type:+80ºC--45ºC | |
Scope of application | Old bridge replacement and new small bridge and the opening of the bridge. |
i It can freely flex in parallel and vertical direction. |
ii It is firm and reliable. |
iii It is smooth, no sudden jump and noise when the vehicle passes by. |
iv It is waterproof and it can prevent the infiltration of debris into the block. |
v It is convenient for installation, inspection, maintenance, removal of dirt. |
1. Slab type expansion jointIt is made of rubber, vulcanized or steel plate.It is suitable for ordinary highway bridge engineering which the expansion volume is less than 6Omm. |
2.Combined expansion jointIt is made of rubber plate and steel plate.It is suitable for ordinary highway bridge engineering which the expansion volume is less than 120mm. |
3. Modular expansion jointIt is composed of the whole shaped steel.And it is composed of the side beam, the middle beam, the beam, the displacement control system, the sealing rubber belt and so on.The advantages of it are good integrity and high bending and compressive strength.There is smooth and no jump and low noise when the vehicle passes by.It applies to all kinds of bend, slope, oblique, wide bridge.Displacement design of Modular Expansion Joint can arbitrary group according to the actual needs. |
Item | Neoprene rubber (apply to -25°C~60°C) | Natural rubber (apply to -25°C~60°C) | Neoprene rubber (apply to -25°C~60°C) | ||
Hardness (IRHD) | 60±5 | 60±5 | 60±5 | ||
Tensile Strength (Mpa) | >=15 | >=16 | >=14 | ||
Elongation at break (%) | >=400 | >=400 | >=350 | ||
Brittleness temperature (ºC) | <=-40 | <=-50 | <=-60 | ||
Compression set constant (Room temperature ×24h) | <=20 | <=20 | <=20 | ||
Resistant Ozone aging (25~50pphm) 20% Elongation 40ºC×96h | No cracks | No cracks | No cracks | ||
Hot air aging test (compared with the previous unaged value occurred biggest change) | Test conditions(ºC×h) | 70ºC×96h | 70ºC×96h | 70ºC×96h | |
Tensile Strength (%) | ±15 | ±15 | ±10 | ||
Elongation at break (%) | ±25 | ±25 | ±20 | ||
Hardness change(IRHD) | 0~+10 | -5~+10 | 0~+10 | ||
Rubber and steel bonding peel strength(kN/m) | >7 | >7 | >7 | ||
Salt water(23°C*14d,4% Concentration) | Volume Change (%) | <=+10 | <=+10 | <=+10 | |
Hardness Change(IRHD) | <=+10 | <=+10 | <=+10 | ||
Oil resistance(No.1 standarad oil,23°C*168h) | Volume Change (%) | -5~+10 | <+45 | <+45 | |
Hardness Change(IRHD) | -10~+5 | <-25 | <-25 |
Product Categories : Bridge Expansion Joint Series > Elastomeric Expansion Joint