Model NO.: various
Material: Neoprene
Temperature: -40oc-230oc
Color: Black
Trademark: Jianfeng
Origin: Hengshui, Hebei, China
Usage: Pipeline Maintance and Testing
Model No.: D 300-2700mm
Shape: Cylinder and According to Your Drawings or Samples
Export Markets: Global
Specification: As Requests
HS Code: 4001100000
Pipeline water blocking air bag
Plugging water balloon and known as the pipeline plugging bag, pipe blockage, closed water test balloon, closed water blocking, pipeline plugging airbags, pipe occluder. Plugging water bag is made by an enhanced natural rubber, every blocking water balloon before delivery will tested at 1.5 times the rated working pressure and the corresponding number of tube. In order to ensure the plugging water bag structure strength, we adopt three times in plugging water bag of the rated working pressure of the safety factor.
Jianfeng pipeline plugging airbags are made of high-quality composite rubber and polymer materials, on the basis of the original product absorbing the advantages of foreign products, through the technological improvement of production and product innovation, in the use of performance, are more high, anti-aging, tight sealing, and adapts to a wide range of diameters and sealing speed, easy to operate than ordinary closed water airbags elastic.
(1)classification of Pipeline water blocking air bag
i.Water plugging air bag by function:
| 1, the pipeline plugging operation type: water blocking air bag is mainly used for pipeline maintenance and sealing construction. |
| 2, the pipeline detection operation type: water blocking air bag is mainly used for pipeline closed water leakage detection construction. |
ii.Water plugging air bag by use of raw materials:
| 1, pure rubber type: water blocking air bag with natural rubber, rubber, rubber, butyl rubber, butyl rubber, made of pure rubber. |
| 2, compound rubber: water blocking air bag using a variety of synthetic or natural rubber processing products. |
| 3, skeleton material type: plugging water balloon with polyester, nylon, nylon, aramid fiber fabric is coated on the surface of rubber or other materials processing products. |
iii.Water plugging air bag according to molding process:
| 1, a curing molding process: the water blocking air bag on the curing tank or other curing equipment through a vulcanization molding products. |
| 2, a number of curing molding process: a number of complex water plugging air bag after a cure is not finished, it uses a number of curing process. |
| 3, the adhesion forming process: forming bonded together by a plurality of groups of film sheet with adhesive material connection. |
| 4, heat vulcanization forming process: water plugging bag film by special equipment will be made of high temperature pressure of the adhesive. |
iv.Water plugging air bag by shape:
| 1, round; |
| 2, cylindrical; |
| 3, square; |
| 4, oval; |
| 5, egg shape; |
| 6, hollow cylindrical. |
v.Water plugging air bag by using pressure:
| 1, no pressure: water blocking air bag is suitable for general drainage, sewage and other non pressure pipe plugging. |
| 2, low pressure: water blocking air bag is suitable for general drainage, sewage and other pipeline acceptance test. |
| 3, medium pressure: water blocking air bag is suitable for the repair of water supply pipeline operation. |
| 4, high pressure: water plugging bag is suitable for oil and other pressure pipeline maintenance. |
(2)Method of use:
Put plug into the need to plug the pipe mouth and the length of the pipe is put into the length of the plug.then through the intake valve rushed into the compressed air to the required pressure can be constructed. After the completion of construction after open the inlet valve to release air, remove plug.
(3)The model of the pipeline sealing air bag is: PVC gas nozzle capsule, compound type closed water plug, air nozzle type closed water plugging, and double different gas filled capsules.
| Two glue a cloth(mm) | Inflation pressure(Mpa) | Three glue two cloth specifications(mm) | Inflation pressure(Mpa) |
| Φ300×1000 | 0.045 | Φ800×1200 | 0.06 |
| Φ400×1000 | 0.040 | Φ1200×1800 | 0.05 |
| Φ500×1000 | 0.031 | Φ1500×2000 | 0.05 |
| Φ600×1000 | 0.028 | Φ2000×2500 | 0.045 |
| Φ700×1000 | 0.027 | Φ2200×2800 | 0.03 |
| Φ800×1200 | 0.026 | Φ2500×3000 | 0.03 |
(4)Closed water plugging detection function:
| 1, the high-rise construction pipeline leakage test: capsule is fed by examination of the mouth, inflation after the inspection, such as pipeline chlamydia or saliva is not strict, you can see the leak test. |
| 2, check the toilet: Capsule on the drain after inflation, such as rubber banding is not strict, water will leak from the interface. |
| 3. Check the floor drain: open the floor drain bowl, the capsule into the floor drain, inflatable splashing in the ground, such as the installation of floor drain not according to the provisions of the pallet filling ash plugging holes, water will be from around the floor drain leakage. |
| 4, a variety of pipeline maintenance temporarily used to block water |
(5)Test should be used to block the water, the capsule specifications should be tested with the pipe supporting, various specifications of the capsule must be used in the corresponding pipeline, The test procedure is as follows:
preparation: first closed water blocking inflatable combination device accessories as tools to check the leakage. The capsules were placed on the bucket full of water in and hold, Pump to the inflatable capsule,Check the leak of the capsule. |
open riser inspection hole, put closed water blocking from the mouth slowly upward into about 0.5m, and then inflate the capsules, the capsule and the inner wall of the tube are closely contacted with the water without leakage. The operator in the lower layer. Note, the capsule to avoid on the riser pipe joints. The reason: 1. The inner wall of the place has a joint, which affects the tightness of water tight. 2.Capsule to the side of the expansion, the pressure does not go up, if continue to inflate, the capsule will be broken. For the cast iron drainage pipe, clean with sand cleaning , flat wall, not allowed to have burrs, otherwise it will affect water plugging, even piercing the capsule. |
in the floor of the mouth (can also be in check) to floor height and check pipes and fittings interface one by one,If there is a leak, make a mark, repair after drainage; If the flexible interface for the rubber ring, can be in the leakage of the interface with water tight bolt fix. If the pipeline inspection without leakage, it can stabilize the water level, duration 15 minutes, 5 minutes level does not drop as qualified. |
(4)The pipeline plugging water balloon deflation, and then slowly out of the capsule, pay attention not to make the capsule damaged. |
| (5)After removing the pipe blocking water bag, water should be able to quickly walk away, such as slow down, there is a debris blockage in the pipe section, should be promptly cleaned. |
| (6)Pipeline plugging water balloon method, also can check squatting type toilet leaks. The capsules were placed on the squatting type toilet drainage mouth and inflated, then squat toilet (water level will on edge), if the water level drops that flushing water inlet interface leakage, or squatting type toilet water closed interface, lax, or squat stool is leakage. It is necessary to exclude. |
Contact information
Sales Manager: Mr.Steven
Mobile Phone: 86-15233296877
Tel: 86-318-5106277
Fax: 86-0318-5106277
Website: www.prolianz.com
Company: Hengshui Jianfeng Engineering Rubber Co., LTD.
Contact us if you need more details on Closed Water Balloon. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Shut-off、Pipe Plugging Inflatable Airbag. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Inflatable Rubber Pipe Plug
