Find Two Diaphragm Pump Windy Operated, BQG Series Two Diaphragm Pump, Diaphragm Pump Windy Operated on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
| Payment Type: | L/C,T/T,D/P,Paypal |
|---|---|
| Incoterm: | FOB,CFR,FCA,CPT |
| Min. Order: | 1 Piece/Pieces |
| Delivery Time: | 5 Days |
Model No.: BQG
BQG Series Two Diaphragm Pump Windy Operated
Product information
The BQG Series Two Diaphragm Pump is driven by compressed air, and the displacement pump is caused by the reciprocating deformation of the diaphragm, and Two Diaphragm Pump Windy Operated working principle is similar to that of plunger pump. Diaphragm Pump Windy Operated according to certain principle and the approach to use, in the use of the specific operation procedures according to certain specifications and points for attention in use, can produce the use of the important role and contribution, to play good use value.When operating with pneumatic diaphragm pump, the following points should be paid attention to: ensure that the maximum particles contained in the fluid do not exceed the maximum safety of the pump through the particle diameter standard.Tighten the BQG Series Two Diaphragm Pump and the connection of each connection to prevent the vibration of the pump caused by vibration. Use antistatic hose.To periodically check and test the reliability of the grounding system, the grounding resistance is less than 100 ohms.Maintain good exhaust and ventilation, away from flammable and explosive and heat sources.The inlet pressure should not exceed the maximum allowable pressure of the pump, and the compressed air above the rated pressure of the pipe pump may result in personal injury and property damage and the performance of the Diaphragm Pump Windy Operated.
The electrostatic spark may cause the loss of personal casualty and property caused by the explosion, and according to the need to use a large enough section of the wire, the grounding screw on the pump is properly grounded.Grounding requirements comply with local laws and regulations and special requirements of the site.The Two Diaphragm Pump Windy Operated exhaust may contain solids, do not vent the vent to the work area or person, lest cause personal injury.When the diaphragm fails, the material from the sewage pump is ejected from the exhaust muffler.Ensure that the pump pressure piping system can withstand the maximum output pressure and ensure the cleaning and working conditions of the multi-stage pump driving air system.When conveying inflammable and poisonous fluid, please connect the vent to the safe place far from the work area.Please use at least 3/8" inner diameter smooth pipe connecting the vent and muffler.
Fluid high pressure can lead to severe personal casualty and property loss, please don't in the pump pressure, the pump and the pipe system for any repairs, rotor pump to do maintenance, to cut off the inlet of the pump, first open bypass pressure relief agencies to pipeline system pressure relief, slowly loosen the connection of the pipe joint.If the harmful toxic fluid pump is transported, please do not send the pump directly to the factory for repair.Liquid conveying part use aluminum alloy material pump, please don't used to transport the liquid containing Fe3 + and halogenated hydrocarbon and other halogenated hydrocarbon solvent, will produce the pump body burst caused by corrosion.Ensure that all parts of the contact conveying body will not be corroded by the fluid.Ensure that all operators are familiar with operational use and control of the safety use of pumps, and rationing necessary protective equipment if necessary.Use the pump properly and do not allow long running time.
Pneumatic diaphragm pump is a new type of conveying machine, which USES compressed air as the power source, and USES the diaphragm in the cylinder to encourage the work to achieve the purpose of conveying various media.
Transportable medium: pneumatic diaphragm pump is suitable for conveying various corrosive, granular liquids, as well as high, volatile, flammable, highly toxic liquids.
Material selection:
1. The materials used in the shell are: aluminum alloy, cast iron and stainless steel.
2. The materials used in the diaphragm are: butyl rubber, chloroprene rubber, fluorine rubber, polytetrafluoroethylene.
Operating principle of pneumatic diaphragm pump:
In work two symmetrical cavity pump, each equipped with a piece of elastic diaphragm, become an organic whole repeatedly connecting rod will be two pieces of the diaphragm, the compressed air from the pump inlet joint in high-pressure air, after pushing two working chamber of the diaphragm movement, driving connecting rod connecting the two pieces of diaphragm synchronous movement.At the same time, another working chamber of the gas discharge from behind the diaphragm pump, once they have arrived at their trip destination is automatically to valve-train compression air cavity is another work, push the diaphragm in the opposite direction, thus formed the two synchronous reciprocating movement of the diaphragm.Each working cavity and two one-way valves, the reciprocating movement of the diaphragm, working content caused the change of the product, forcing two one-way valves open and close alternately, forcing the liquid continuous suction and discharge.
Dongda Group has 10 series, more than 70 products. Including coal feeder, production rescuer equipment, chemical oxygen self-rescuer, compressed oxygen self-rescuer, oxygen filling pump, rolling cage equipment, coal mining prompt transportation, electrical machinery, agriculture machinery etc.
Product Categories : Mine Pneumatic Pump > Pneumatic Diaphragm Pump
