Jian Feng PU Sealant (made in China)

Model NO.: renz10 Morphology: Water Emulsion Material: Polyurethane Main Agent Composition: Polyurethane Elastomer Promoter Composition: Complexing Agent Color: Black Surface Dry Time(Min): 50 Certificate: ISO9000 Trademark: JianFeng Specification: As Drawing Requests HS Code: 5522233 Bonding Function: Structural Adhesive Application: Automobile, Construction, Windshield and Side Glass Sealing of Cars, Buses Classification: Room Curing Characteristic: Waterproof Composition: Organic Material Density(G/M): 1.14 Tensile-Strength(MPa): 11.9 Export Markets: Global Transport Package: in Pallets or Wooden Cases Origin: Hebei, China I  
Q:Please introduce the Polyurethane Adhesive.
A:
polyurethane adhesive is elastic sealing materials which are one component, moisture curing polyurethane foam filling, multi-purpose .Filling Polyurethane pre polymer and catalyzer and gas propellant in iron aerosol cans withstanding pressure. When constructing, Spray aerosol gel to the site of the construction by using matching sizing gun or manual nozzle.And complete molding, foaming, bonding and sealing processes in the short term.Cured foam elastomer of Polyurethane (PU) foam sealant has a lot of excellent performance,such as bond,waterproof, withstanding thermal expansion and contraction,heat insulation,sound insulation and even flame retardant,etc.
 
 



II
Q:What's about the application of polyurethane adhesive?
A:

Door and window installation: Caulking,seal,fixed bonding between doors and windows and wall.

Waterproof plugging: Repair of plugging of Tap water pipes, sewers and other loopholes.

Thermal insulation filling: Insulation joint of cold storage and air conditioning.

Daily maintenance:Repair the empty of slot, wall tiles,tiles and floor.

Sound insulation and noise elimination:Gap filling of the meeting room or Sound lab during renovating.

Packaging and transportation: It is convenient to packaging fragile valuables.

 

 

 
III
Q:What is the storage mode about polyurethane adhesive?
A:The period of validity is 12 months.It should be placed in a cool and dry place. Avoid direct sunlight and the temperature should not exceed 50 degrees.
 
 
 

 
 
 
 
IV
Q:What are the product features of polyurethane adhesive?
A:

1.It is environmentally friendly products and convenient construction.

2.Formation of jointless after curing ,and it improve the construction of waterproof and permeability resistance.

3.The film has a high strength and elongation.

4.Its maintenance is simple.It can achieve the original waterproof effect to repair the damaged part.

 


 
 
V
Q:What matters should be attention to about polyurethane adhesive?
A:The following matters should be attention to:

1.No burning or piercing material tank and empty tank after using.

2.Do not invert during transporting and storage processes.

3.The construction site should have good ventilation conditions.Construction personnel should wear work gloves and goggles work clothes.At the same time do not smoke.

4.The non - solidified foam is sticky to the clothes and the skin.Pay attention to protection when using.If the bubble is touching the eyes, rinse immediately with water and consult a doctor.

  
 
 
 
VI
Q:What's the performance index of polyurethane adhesive?
A:

Index		Technical index	Experimental method
tensile strength		≥6.0	GB/T19250
Tensile strength retention rate	Heating treatment	≥100
	Alkali treatment	≥70
	acid treatment	≥80
elongation at break	Without treatment	≥450
	Heating treatment	≥450
	Alkali treatment	≥450
	acid treatment	≥450
Bending rate at low temperature	Without treatment	≤-35,No cracks
	Heating treatment
	Alkali treatment
	acid treatment

 
 
 
 
VII
Q:What are the key points of construction operation about polyurethane adhesive?
A:

1.process flow Clean - details of basic level surface to make glue, besmear to brush glue (cold) base oil - details attached middle construction - the first time and the second time coating and coating to third time coating waterproof layer construction, waterproof layer a test to cover ACTS the role of surface, waterproof layer second acceptance test and waterproof layer.

2.Before construction of waterproof layer, should swept away the primary surface dust and other debris, and use wet cloth clean to brush one more time.

3.Besmear brushs the waterproof layer of the basic surface, can not have uneven, loose, empty drum, play sand, cracking and other defects, the moisture content is generally not more than 9%.

4. Besmear bottom glue (cold priming oil) : 1) Dispensing glue, first to add a and b material polyurethane xylene, ratio is 1:1. 5:2 (weight ratio) and mixed amount shall be determined according to specific situation, unfavorable and overmuch. 2) Brush glue, according to the law on preparation, good glue mixture evenly with the roller surface at the grassroots level, besmear brushs the amount of 0.15-0.2 kg/m2, besmear after normal temperature season 4 h later, feel is not sticky, can do the next working procedure.

5.Coating waterproof layer construction: Polyurethane waterproof material for Polyurethane material a, Polyurethane material b and xylene, ratio of 1:1, 5:0. 2 (weight ratio).

 

 
 
 
 
Contact information
Sales Manager:                  Miss. Joyce
Mobile Phone:                   +86-15233296877
Tel:                                     86-318-5106277
Fax:                                    86-0318-5106277
Website:                             www.prolianz.com
Company:                           Hengshui Jianfeng Engineering Rubber Co., LTD.
 

Contact us if you need more details on Jian Feng PU Sealant (made in China). We are ready to answer your questions on packaging, logistics, certification or any other aspects about China PU Sealant、China Polyurethane Adhesive. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Waterproof Sealant Series > Polyurethane Sealant