Model NO.: various Material: Rubber with Steel Certificate: ISO9000 Bearing Capacity: 0-30000kn Transport Package: in Pallets or Wooden Cases Origin: Hebei, China Usage: Infrastructure Construction Shape: Rectangle and Circular Export Markets: Global Trademark: JianFeng Specification: As Drawing Requests HS Code: 5522233 Contact information
Sales Manager: Miss Anna Lee
Mobile Phone: +86-15132836877
Tel: 86-318-5106277
Fax: 86-0318-5106277
Website: www.prolianz.com
Company: Hengshui Jianfeng Engineering Rubber co., LTD.
Description of pot bearings
Introduced nearly 50 years ago, Pot Bearings are now in service in thousands of structures throughout the USA and the world. There are good reasons for this popularity, all stemming from the confined elastomer principle. The elastomeric Pot Bearing consists of a confined disk of elastomer within a short cylinder (the pot). Loading is then applied via a close fitting steel 'piston'. This puts the elastomer under high pressure,making it behave like a liquid, permitting rotation in any direction with very little resistance. |
Performances and Classifications of pot bearings
1.Free sliding pot bearing: Has vertical rotation, longitudinal and horizontal gliding performances and its
serial number is SX;
2.One-way sliding pot bearing: Has vertical rotation and one-way sliding performance and its serial
number is DX;
3.Fixed pot bearing: Only has vertical rotation performance and its serial number is GD.
Technical datas of elastomeric pads inside pot bearings
ITEMS | Common Type | Winter Hardness |
CR | NR | EPDM |
Tensile Strength (Mpa)≥ | 19 | 19 | 16 |
Elongation At Break (%)≥ | 450 | 500 | 350 |
Adhesive Seperating Strength with PTFE at 180°C kgf/2.5cm | 5 | 5 | 4 |
Brittleness Temperature≤ | -40 | -55 | -65 |
Compression Set (%) (70°Cx22H)≤ | 30 | 30 | 30 |
Ozone Resistance 1PPm30°Cx100h | No Cracking | No Cracking | No Cracking |
Aging Factor%≥ | 0.8 | 0.85 | 0.8 |
Hardness ( Shore A) | 60±5 | 60±5 | 60±5 |
Features of pot bearings
1.Compact -Low overall height.
2.Compact -Small footprint for significant vertical loads.
3.Small shift in centre of pressure due to rotation.
4.Low translation resistance.
5.Can accommodate lateral loading at same time as translation.
6.Specials - To accommodate up lift loadings.
Application of pot bearing
Pot type rubber bridge bearing can be used in steel or concrete structures. These low profiles, compact bearings are particularly useful to transmit large vertical load while accommodating large movements and multi-directional rotation.Separate mechanisms for rotation and translation (where applicable) provide minimum eccentricity of the load and minimum frictional resistance to movement. High side loads can also be accommodated simultaneously. |
Technical Performance of pot bearing
1.Vertical rotation angle of the bridge Pot bearing should not be less than 40';
2.Vertical bearing capacity (KN) 1000-50000 of the Bridge Pot bearing is divided into 28 grades. Horizontal bearing capacity of the non-gliding
surface is 10% of the vertical.
3.Friction coefficient of the Bridge Pot bearing: Room temperature μ ≤ 0.04
Contact us if you need more details on Pot Bearings. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fixed Pot Bearing、Charpy Birdge Pot Bearing. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Bridge Bearing Series > Pot Bearing