Find Waterstops For Concrete, Rubber Water Stopper, Water Stop on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
| Payment Type: | L/C, T/T, Western Union |
|---|---|
| Min. Order: | 10 |
Model No.: various
| 1) CB type rubber waterstop (submerged middle pass); |
| 2) CP type rubber sealing belt (embedded in the middle of groovless); |
| 3) EB type rubber sealing belt (outside attached middle pass); |
| 4)EP type rubber sealing belt (post type middle pass free). |
| 1) Natural rubber waterstop; |
| 2) Chloroprene rubber waterstop; |
| 3) Three EPDM rubber sealing belt. |
| 1) apply to deformation of the sealing belt, denoted by B; |
| 2) apply to water construction joints with S; |
| 3)for sealing on special anti-aging requirements of the seam zone, J said. |
| 1) Embedded type rubber Water Stop belt: | mainly used in the concrete deformation joint, expansion joints in concrete is arranged inside, with in the form of elastic rubber material and structure to adapt to the concrete expansion deformation ability. Use and adapt to temperature: ordinary type: - 25 DEG C to + 60 DEG C; Hardy: - 40 DEG C +60 DEG C |
| 2) Back stick type rubber water stop belt (externally bonded rubber waterstop): | This product is mainly used for cast-in-place concrete when in construction joints and the deformation joints in, and concrete structure become one of the basic engineering, underground facilities, tunnels, aqueducts, block dams, ensure the service life of the engineering construction. |
| 3) Steel edged rubber water stop belt: | steel edged rubber water stop with is the rubber water stopping belt transect using non thick structure, strong area and water area, so that each part of the stress is uniform, reasonable. |
| 4) Seam sealing water leakage of the water swellable rubber water stop belt: | the case of the water expansion Sealing Strip is control of civil structures, soaking the ideal of the new material, when the rubber immersed in water, the hydrophilic genes and water generated by the reaction of hydrogen bonding, self expansion, the gap filling, a wide range of uses. The product is suitable for concrete construction joint, post pouring seam sealing function, but also suitable for building component assembly joints, seams, shield tunnel segment joint, seam wall waterproof engineering and widely used in storage tank, sedimentation tank, underground garage, basement, Metro, dams, tunnels, culverts, dams and other underground construction engineering and hydraulic engineering. Type BFGB (NBR) -350-- The width is 350 mm, material is nitrile rubber. Suitable for oil containing petroleum based sewage seepage control project, suitable temperature -35 to 60 degrees Celsius. Type BFGB (NR) -450-- The width is 450 mm, the material is natural rubber, it is suitable for the fresh water seepage control engineering, and the temperature is -40 ~ 60. Type BFGB (CR) -380-- The width is 380 mm, the material for chloroprene rubber. Suitable for acid sewage seepage control project, suitable temperature to 60 DEG C - 35. |
| 5) Plate type water stop belt: | the water stop belt has good elasticity, abrasion resistance, aging resistance and tear resistance, strong adaptability to deformation, good waterproof performance, applicable temperature range: -45-+60 degrees Celsius. Mainly used for cast-in-place concrete when in construction joints and deformation joints and concrete structure has become one of the basic engineering, such as underground facilities, tunnels, aqueducts, dams, liquid storage building material. |
| 1 waterstop shall not be outdoor exposure for long time , to prevent rain, do not contact with the chemical substances that is strong. |
| 2 prevent the machinery and steel bars damage the waterstop in the course of transportation and construction. |
| 3 during the construction, water stop belt must be fixed reliable to avoid displacement occurred in the pouring of concrete , ensure the waterstop in the correct position in concrete . |
| 4 fixed sealing strip method: using additional reinforcement fixation; special fixture fixation; the wire and template fixed, for perforation, can only choose install area at the edge of the waterstop shall not damage other parts. |
| 5 users should be according to the engineering structure when orders, calculate the length of good products when design drawings, different-shaped structure must have drawing instructions and try to let the seal belt are connected into a whole in the factory, you can adopt the method such as the electric heating plate vulcanization adhesion or cold bonding (rubber water stop belt) or welding (of the plastic waterstop) method if need connect in site . |
| In the construction process, because there are many sharp stones and sharp edge of reinforced concrete, so in the pouring and tamping and positioning rubber water stop belt, should pay attention to the impact force of the pouring and tamping, in order to avoid piercing the rubber sealing belt due to excessive force .It should be repaired in time if have rupture phenomenon, or rubber water stop belt resistance force ability will greatly reduce in the joint deformation and water pressure. |
| Must keep spreading in the position of the interface, not to let the rubber water stop belt rolling, kink, such as the discovery of torsion show like should timely adjust. |
| In the cast and fix rubber strip, rubber sealing strip should prevent migration. |
| Rubber water stop belt should avoid direct sunlight during transportation, not with a heat source, oil and harmful solvent contact. Finished products should be taken straight flat, do not add weight on it. it is best to keep the storage places -10-+30, relative humidity 40% - 80%. |
Product Categories : Water Stop Series > Rubber Water Stop
